MSVT1105A-100 Temperature and Vibration Sensor

Introduction

  • Wide frequency response
  • Superior long-term stability
  • Small size, high precision
  • Low noise
  • Sealed, high versatility
  • Resistant to harsh environments

Description

Performance

Test conditions (unless otherwise stated): normal temp., 12V±1V

Parameter Unit MSVT1105A-100
Range g ±100
Frequency Response Range Hz 0.5~10000
Cross Sensitivity % <5
Zero-g Voltage mA 12±0.5
Sensitivity μA/g 80±5
Output Range mA (4±0.5) ~ (20±0.5)
Non-linear %FS <1
Operating Current mA ≤60
Insulation Resistance Ω DC500V, >200MΩ
Withstand Voltage V AC2500V/50Hz/60s, Leakage<2mA

 

Performance Environmental Characteristics Physical Properties
Type Two-wire PT100 Operating Temp. °C -55 ~+85 Shell Material 304 Stainless steel
Range °C -55~250 Storage Temp. °C -55 ~+125 Weight g <2000
Resolution °C 1 Shock g 1000 Installation M6×35 screw
Grade % A (±0.15%) IP Rating IP68 Interface Harting connector
Thermal Response s ≤30s

(tested in water with a flow velocity of 0.4m/s)

 

Application

  • Metro monitoring
  • Temperature, vibration monitoring

 

Dimensions and Wiring Definition

Dimensions

Output Wiring Definition

MSVT1105A 100 Dimensions 300x170 - MSVT1105A-100 Temperature and Vibration Sensor Contact Mark Description
1 VIB Vibration signal output
2 NC Reserve
3 PT1+ Temp. signal 1 output+
4 PT1- Temp. signal 1 output-
5 NC Reserve
6 NC Reserve
7 +12V Power+
8 GND Power-
9 ST Self-test signal
10 PE Shielded wire
11 NC Reserve
12 NC Reserve