Description
Performance
Test conditions (unless otherwise stated): normal temp., 12V±1V
Parameter | Unit | MSVT1204A-100 |
Range | g | ±100 |
Frequency Response Range | Hz | 0.5~10000 |
Cross Sensitivity | % | <5 |
Zero-g Voltage | mA | 12±0.5 |
Sensitivity | μ A/g | 80±5 |
Output Range | mA | (4±0.5) ~ (20±0.5) |
Non-linear | %FS | <1 |
Operating Current | mA | ≤60 |
Insulation Resistance | Ω | DC500V, >200MΩ |
Withstand Voltage | V | AC2500V/50Hz/60s, Leakage<2mA |
Performance | Environmental Characteristics | Physical Properties | ||||||
Type | – | Two-wire PT100 | Operating Temp. | °C | -55~+125 | Shell Material | – | 304 Stainless steel |
Range | °C | -55~250 | Storage Temp. | °C | -55~+125 | Weight | g | <2000 |
Resolution | °C | 1 | Shock | g | 1000 | Installation | – | M6×33 screw |
Grade | % | A(±0.15%) | IP Rating |
|
IP68 | Interface |
|
Harting connector |
Thermal Response | s | ≤30s
(tested in water with a flow velocity of 0.4m/s) |
Application
- Aviation, aerospace
- Weapon, rail transit
- Product vibration test, modal analysis, health monitoring, etc.
Dimensions and Wiring Definition
Dimensions |
Output Wiring Definition |
||
![]() |
Contact | Mark | Description |
1 | VIB | Vibration signal output | |
2 | NC | Reserve | |
3 | PT1+ | Temp.1 signal output+ | |
4 | PT1- | Temp.1 signal output- | |
5 | PT2+ | Temp.2 signal output+ | |
6 | PT2- | Temp.2 signal output- | |
7 | +12V | Power+ | |
8 | GND | Power- | |
9 | ST | Self-test signal | |
10 | PE | Shielded wire | |
11 | NC | Reserve | |
12 | NC | Reserve |