Specifications
| Shell | Aluminum Alloy |
| Shell Finishing | Anodizing (Covered with Yellow Amino Drying Enamel) |
| Insulator | Glass Re-inforced Plasctic |
| Sealing Ring | Silicone Rubber, Nitrile Rubber |
| Contact | Gold-Plated Copper Alloy (Solder Cup) |
| Mechanical Life | 500 cycles |
| Mechanical Demating Force | ≤245 N |
| Motor Driven Demating and Mating | Motor Rated Voltage：DC 27 V ± 3 V |
| Motor Rated Current：≤ 3 A | |
| Motor Driven Mating Time：≤ 23 s | |
| Motor Driven Demating Time：≤ 5 s | |
| Sinusoidal Vibration | Acceleration 118 m/s2 |
| Shock | Acceleration 490 m/s2 |
| Acceleration | 98 m/s2 |
| Operating Temperature | -40℃ ~ 50℃ |
| Salt Spray Test | 96 h |
| Relative Humidity | At 40℃ ± 2℃: 92% ~ 98% |
| Sound Vibration | 50 Hz ~ 10000 Hz, 75 dB ~ 160 dB |
| Operating Pressure | Mated: 78.7 Kpa ~ 0.49 MPa
Socket: 4×10-3 Pa ~ 0.49 MPa |
| Radiation Resistant | γ : 0.5 ~ 0.6 μR/s
Neutron Flux: 1 to 2 cm2 · S |
Electrical Ratings
Contact Resistance and Rated Current
|
Contact Specifications |
Number of contacts | Contact Resistance | Rated Current | |
| Before 500 Cycles Life |
After 500 Cycles Life |
|||
|
Φ1.1 |
206 | ≤20 mΩ | ≤30 mΩ | 5 A |
| Φ2.2 | 8 | ≤10 mΩ | ≤20 mΩ |
20 A |
|
Φ3.5 |
8 | ≤5 mΩ | ≤10 mΩ |
50 A |
Insulation Resistance
|
Normal Conditions |
High Temperature Conditions | Low Temperature Conditions | Humid Conditions |
| ≥1000 MΩ | ≥20 MΩ | ≥1000 MΩ |
≥20 MΩ |
Dielectric Withstand Voltage
|
Normal Conditions |
Low Pressure Conditions | Humid Conditions |
| AC 1000 Vrms | AC 250 Vrms |
AC 500 Vrms |
How to Order
Connector Specifications
|
Code |
Description | Part Number of Cable Clamp | Cable Clamp Type |
|
JF1-222TDA |
222-Pin Motor Driven Umbilical Plug |
JF1-222-110(a)(b) | Split Cable Cover |
|
JF1-222T |
222- Pin Manual Umbilical Plug |
JF1-222-111(a)(b) | Split Cable Cover |
| JF1-222Z | 222-Pin Single-Layer Unsealed Umbilical Socket | JF1-222-112(a)(b) |
Split Cable Cover |
|
JF1-222Za |
222-Pin Single-Layer Unsealed Umbilical Socket | JF1-222-112(a)(b) | Split Cable Cover |
|
JF1-222ZM2 |
222-Pin Double-Layer Sealed Umbilical Socket | JF1-222-112(a)(b) |
Split Cable Cover |
| JF1E-222ZM2 | 222-Pin Double-Layer Sealed Umbilical Socket | JF1-222-112(a)(b) |
Split Cable Cover |
| JF1-222ZM3 | 222-Pin Triple-Layer Sealed Umbilical Socket | JF1-222-112(a)(b) |
Split Cable Cover |
| JF1-222ZM3-5 | 222-Pin Triple-Layer Sealed Umbilical Socket | JF1-222-125(a)(b) |
Split Cable Cover |
JF1 Contact Arrangement (Front View of Plug Mating Surface)
 |
|||
|
Pin Diameter |
Φ1.1 mm | Φ2.2 mm | Φ3.5 mm |
|
Symbol |
 |
 |
 |
| Number of contacts | 215 | 8 |
8 |
Dimension
JF1-222T Manual Umbilical Plug
 |
JF1-222TDA Motor Driven Umbilical Plug
 |
JF1-222Z Single-layer Unsealed Umbilical Socket
 |
JF1-222Za Single-layer Unsealed Umbilical Socket (The flange Mounting Dimensions are the same as JF1-222ZM2)
 |
JF1-222ZM2 Double-layer Sealed Umbilical Socket
 |
JF1-222ZM3 Triple-layer Sealed Umbilical Socket
 |
JF1-222ZM3-5 Triple-layer Sealed Umbilical Socket (Different from the JF1-222ZM3 Cable Cover)
 |
