Specifications

Shell	Aluminum Alloy
Shell Finishing	Electroless Nickel Plating
Insulator	Thermosetting Plastic
Sealing Ring	Silicone Rubber, Nitrile Rubber
Contact	Gold-Plated Copper Alloy (Solder Cup)
Mechanical Life	300 cycles
Mechanical Demating Force	19.6 N ~ 59 N (YF1N-48TD) 58.8 N ~ 98 N (YF1N-48T)
Motor Driven Demating	DC 27 ± 3 V Demating Time ≤ 0.2 s (for YF1N-48TD)
Electromagnetic Coil	Resistance 6 Ω ~ 7 Ω,
Sinusoidal Vibration	Frequency 10 ~ 50 Hz, Amplitude 1.5 mm Frequency 50 ~ 2000 Hz, Acceleration 98 m/s²
Shock	Half-sine Wave, Peak Acceleration 686 m/s², Pulse Duration 11 ms (YF1N-48TD) Half-sine Wave, Peak Acceleration 1200 m/s², Pulse Duration 11 ms (YF1N-48T)
Acceleration	Peak Acceleration: 250 m/s² (YF1N-48TD) Peak Acceleration: 833 m/s² (YF1N-48T)
Operating Temperature	-40℃ ~ +85℃ (YF1N-48TD) -40℃ ~ +125℃ (YF1N-48T)
Relative Humidity	At 40℃ ± 2℃: 90% ~ 95% (YF1N-48TD) At 40℃ ± 2℃: 95% ~ 98% (YF1N-48T)
Operating Pressure	222.9 Kpa ~ 1.33 Pa (YF1N-48TD) 300 kPa ~ 1.33 Pa (YF1N-48T)
Sealing	0.3 MPa
Salt Spray Test	48 h
Radiation	Neutron Fluence: 6 × 10¹³ n/cm² Total Gamma Dose: 6 × 10² Gy Instantaneous Gamma Dose Rate: 1.1 × 10⁹ Gy/s

Note: Vibration, shock and acceleration performance decrease by 50% during mating. Filtering characteristics and radiation are designed for different plugs and mating with YF1N-48Z.

Electrical Ratings

Contact Resistance and Rated Current

Code	Pin Diameter	Operating Current	Contact Resistance
Code	Pin Diameter	Operating Current	Before Life	After Life
YF1N-48TD	1 mm	5 A	≤10 mΩ	≤20 mΩ
YF1N-48T	1 mm	5 A	≤10 mΩ	≤20 mΩ

Insulation Resistance

YF1N-48TD/Z Motor Driven Plug

	Code	1 atm	High Temperature	Humid and Heat	Radiation
Contact	YF1N-48Z	200 mΩ	200 mΩ	10 mΩ	150 mΩ
Contact	YF1N-48Z16	1000 mΩ	500 mΩ	50 mΩ	—
Electromagnetic Coil	YF1N-48Z	500 mΩ	50 mΩ	10 mΩ	50 mΩ
Electromagnetic Coil	YF1N-48Z16	500 mΩ	50 mΩ	10 mΩ	—
Shorted Cap		1000 mΩ	—	—	—

Note: When used with YF1N-48Z, the test voltage is DC250V under 1 atm and DC200V under other conditions. When used with YF1N-48Z16, the test voltage is DC500V under 1 atm, DC100V when shorted cap is applied, DC200V under other conditions.

YF1N-48T/Z Manual Plug

	1 atm	High Temperature	Humid and Heat
Contact	1000	200	10
Shorted Cap	1000	——	——

Note: Under standard conditions, the test voltage is DC 500 V .

Under other conditions, the test voltage is DC 250 V.

Dielectric Withstand Voltage

YF1N-48TD/Z Motor Driven Plug

	Code	1 atm	Low Pressure	Humid	After Radiation
Contact	YF1N-48Z	DC 500 Vrms	DC 200 Vrms	DC 100 Vrms	DC 500 Vrms
Contact	YF1N-48Z16	1000 Vrms	200 Vrms	100 Vrms	—
Electromagnetic Coil	YF1N-48Z	625 Vrms	100 Vrms	200 Vrms	—
Electromagnetic Coil	YF1N-48Z16	625 Vrms	100 Vrms	200 Vrms	—
Shorted Cap		1000 Vrms	—	—	—

YF1N-48T/Z Manual Plug

	1 atm	Low Pressure	Humid
Contact	DC 500 Vrms	DC 500 Vrms	DC 200 Vrms
Shorted Cap	1000 Vrms	—	—

Filtering Characteristics

Operating Frequency	Total Attenuation
1 ~ 5 MHz	≥10 dB
5 ~ 30 MHz	≥20 dB
30 ~ 100 MHz	≥40 dB
≥100 MHz	≥55 dB
DC ~ 100 KHz	Impedance <0.05 Ω/Pin

How to Order

Eg：YF1N-48TD: Indicates a YF1N type 48 pin umbilical motor driven plug.

Model Specifications

Quality Grade	Code	Feature
J Grade	YF1N-48T	48 Pin Manual Plug Mating only with sockets that have the same layout
	YF1N-48TD	48 Pin Motor Driven Plug Mating only with sockets that have the same layout
	YF1N-48Z	48 Pin Filtered Socket Mating only with plugs that have the same layout
	YF1N-48Z16	48 Pin Non-filtered Socket Mating only with plugs that have the same layout
Reliability Improved	J/K₊YF1N-48TD	48 Pin Motor Driven Plug Mating only with sockets that have the same layout
	J/K₊YF1N-48Z	48 Pin Filtered Socket Mating only with plugs that have the same layout
	J/K₊YF1N-48Z16	48 Pin Non-filtered Socket Mating only with plugs that have the same layout