J30J

J30J Series

J30J Series Micro-D MIL-Spec Connectors

  1. This series is equivalent to USA MDM series;
  2. Nine types :9, 15, 21, 25, 31, 37, 51, 74, 100;
  3. Mated wire section area: 0.1～15 mm2;
  4. This series employs high-density flexible pins;
  5. Meeting the requirements of GJB2446 “Polarized shell, micro miniature rectangular electrical connector general specification” (equivalent to MIL-C-83513）;
  6. The locking subassemblies are offered with the connectors according to your order. You should give me information in the papers, if you do not need the locking subassemblies.
  7. This series comply with the following specification:
    Q/Ln.J6-69-92 J30 Series Miniature Rectangular Electronic Connector Technical Condition.
Category:

J30J Miniature Rectangular Electronic Connector Series

Characteristic

Ambient temperature -55°C～ +125°C Rated current 3 A
Relative humidity 98% at +40°C Insulation resistance ≥ 5000MΩ
Contact resistance ≤ 10mΩ Mechanical life 500 times
Dielectric withstand voltage 800 V Vibration

10Hz ~ 2000Hz

196 m/s2
Random vibration Power spectral density 0.4 g2/Hz,

Total acceleration rms value 23.1g

 Shock 735 m/s2, 11ms
Acceleration 735 m/s2 Low air pressure 4.5 kPa 200V

 

Product Family Tree

J30J Common Series
  • J30J Crimp series

with crimp contacts
  • J30J Solder S series

with solder contacts
  • J30J Straight Inserting PCB N series

with the grid of 2.54X2.54
  • J30J Straight Inserting PCB N-J series

with the grid of 1.27X2.54 (row x line)
  • J30J 90° Inserting PCB W series

with the grid of 2.54X2. 54
  • J30J 90° Inserting PCB W-J series

with the grid of 1.27X2. 54 (row X line)

 

J30J Improved Series
  • J30J-A Crimp Series

With crimp contacts and metal shield cover. And the drawing cable direction is parallel with contact axis.
  • J30J-C Crimp Series

With crimp contacts. And the drawing cable direction is vertical with contact axis.
  • J30J-D Crimp Series

With crimp contacts and horizontal groove specially designed near the mounting hole to prevent the hex nut spinning. Only for front-of-panel mounting.
  • J30J-AD Crimp Series

With crimp contacts and metal shield cover. And the drawing cable direction is vertical with contact axis. Horizontal groove specially designed near the mounting hole to prevent the hex nut spinning. Only for front-of-panel mounting.
  • J30J-Q Crimp Scries

With crimp contacts, and the shell is wider than others.

 

J30J Locking subassemblies
  • J3OJ Free Locking subassemblies

Type L, Type K and Type KI for end-free locking subassemblies.
  • J3OJ End-fixed Locking Subassemblies

Type P, Type PO, Type Pl, Type P2, Type P3, Type P4 Type P5, Type P7, Type P8, Type P9, Type PIO, Type Pl 1, Type P14, Type V and Type VI for end-fixed locking subassemblies.

According to the locking subassemblies, this series consists of end-free locking subassemblies and end-fixed locking subassemblies.

 

J30J Cable Clipper Subassemblies
  • Type A1 cable clipper subassemblies

Type A1 cable clipper is used only with J30J common crimp plug (receptacle) subassembly.
  • Type A3 cable clipper subassemblies.

Type A3 cable clipper can be used with J30J common crimp plug (receptacle) components or with J30J common solder S-series plug (receptacle) subassemblies.

This series consists of type A1 and type A3 cable clipper subassemblies.

 

Contact arrangement

J30J Contact arrangements 9 J30J Contact arrangements 15
J30J-9 J30J-I5
J30J Contact arrangements 21 J30J Contact arrangements 25
J30J-21 J30J-25
J30J Contact arrangements 31 J30J Contact arrangements 37
J30J-31 J30J-37
J30J Contact arrangements 51 J30J Contact arrangements 74
J30J-51 J30J-74
J30J Contact arrangements 100
J30J-100

 

Order mark

J30J – 51 ZK P G – AD
Main code:

  • J30J series
 J30J
Number of contacts:

  • 9, 15, 21, 25, 31, 37, 51, 74, 100
 51
Connector and contact type:

  • TJ- plug with pins,
  • ZK- Receptacle with socket
 ZK
Type of contact terminal:

  • Null-Crimp,
  • S-Solder,
  • N-Straight inserting PCB,
  • W-Right angle inserting PCB,
 –
Type of locking subassemblies:

  • Check More details in J30J Locking Subassemblies
 P
Finishing:

  • Null- Shell plated with nickel
  • G- Shell plated with cadmium
 G
Improved type:

  • A-Shell with shielding braid cable clipper,
  • D-There is spinning-resistance groove in the interface terminal of the receptacle shell flange.
  • J-The grid of PCB is 1.27×2.54 (row*line).
  • Q-The shell flange is widened.
 AD

Example: J30J-51 ZK P G-AD

The above mark means: a J30J fixed-end connector with 51 contacts, receptacle with socket, crimp terminal, Type P locking subassemblies, shell plated with cadmium and with shielding braid cable clipper, and with spinning-resistance groove.

Related products

Shopping Cart